Connecting A Dvd Player With Component Video And A Vcr - Toshiba 51H93 Owner's Manual

Connecting a DVD player with component video and a VCR

®
Your TV has ColorStream (component video) inputs.
Connecting a DVD player with component video output (such
as a Toshiba DVD player with ColorStream
enhance picture quality.
You will need:
five coaxial cables
two sets of standard A/V cables
• For better picture performance, if your VCR has S-video, use an
S-video cable (plus the audio cables) instead of the standard video
cable. However, do not connect both types of video cable to
VIDEO 1 at the same time or the picture performance will be
unacceptable.
• If you have a mono VCR, connect L/MONO on the TV (VIDEO 1)
to your VCR's audio out jack using the white audio cable only.
one pair of standard audio cables
one set of component video cables
• You can connect the component video cables (plus audio
cables) from the DVD player to either set of ColorStream jacks
on the TV (HD-1 or HD-2). The ColorStream HD-1 and HD-2
jacks can be used with Progressive (480p, 720p) and
Interlaced (480i, 1080i) scan systems. A 1080i signal will
provide the best picture performance.
• If your DVD player does not have component video, see
page 15. If your DVD player has DVI/HDCP video, see
page 18.
• Do not connect an S-Video cable and a standard video cable
to VIDEO 1 (or VIDEO 2) at the same time or the picture
performance will be unacceptable.
To view antenna or Cable channels:
Turn OFF the VCR. Select the ANT 1 video input
source on the TV.*
To view the DVD player:
Select the ColorStream HD-1 video input source on
the TV.*
To view the VCR:
Select the VIDEO 1 video input source on the TV.*
or... Tune the TV to channel 3 or 4 (whichever channel is vacant
in your area) and select the ANT 1 video input source on
the TV.*
To record a TV program while watching a DVD:
Tune the VCR to the channel to record. Select the
ColorStream HD-1 video input source on the TV* to view
the DVD.
_____________
*
To select the video input source, press INPUT on the remote control
(see page 61). To program the TV remote control to operate other
devices, see pages 30 to 33.
16
Chapter 2: Connecting your TV
® ) can greatly
Connect the IR
blaster cable to
the G-LINK jack
(see page 25)
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
From antenna or Cable
Stereo VCR
IN from ANT
CH 3
CH 4
OUT to TV
TV
)
ANT( 75
ANT-1 ANT-2
REC OUT
VIDEO L R
AUDIO
IN
COLOR
VIDEO 1 VIDEO 2
STREAM
HD-1
Y
S-VIDEO
P
B
VIDEO
P
R
L/
MONO
L
AUDIO AUDIO AUDIO
R R
Y
P P
B R
S-VIDEO COMPONENT VIDEO
OUT
DVD player with component video
VIDEO AUDIO
L R
IN
OUT
L R
DVI/HDCP IN TheaterNet
G-LINK
IEEE1394
1
IEEE1394
2
DIGITAL
AUDIO OUT
COLOR
STREAM
HD-2
Y
AUDIO
R L
P
B
OUT AUDIO CENTER
CHANNEL IN
P
R VIDEO
L/
MONO
L TheaterNet
L
VAR
AUDIO AUDIO
ON OFF
R R R
IR OUT
AUDIO
OUT
L
VIDEO
R
OUT