Led Indications - Toshiba TheaterWide 50HM66 Operating Manual

HM66_EN.book Page 46 Thursday, February 23, 2006 2:49 PM

LED indications

The yellow blue and red/green LED lights on the TV (at the bottom center of the TV) indicate the TV's status, as described below:
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
TV front
Yellow LED
LED Indication
1) Blue is ON (solid).
2) Yellow blinks.
3) Blue is ON (solid).
Yellow blinks.
4) Yellow is ON
(solid). Red blinks.
5) Yellow is ON
(solid).
6) Red blinks.
7) Blue is ON (solid).
Green blinks.
8) Blue blinks slowly.
9) Blue blinks quickly.
10)Blue blinks quickly.
Red blinks.
11)Blue blinks quickly.
Yellow blinks.
Red blinks.
If, after trying solutions, the problem still exists:
In the U.S., call TACP Consumer Solutions at 1-800-631-3811.
•
In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click
•
"Home Entertainment," and then click "Support."
46
Chapter 7: Troubleshooting
Blue LED Red/Green LED
Condition Solution
The TV is operating
–
properly.
In LPS mode (standby
See "Setting the Quick Restart™ feature" (- page 20).
with Quick Restart ON).
The TV will automatically try to restart itself eight times
(see item #4).
Note: If the TV is powered off and then quickly on again
when the lamp unit is hot, it may take several minutes
The lamp is not working
for the picture to appear on-screen. This is a property of
properly.
DLP TV lamp technology and is NOT a sign of
malfunction. For details, see "Setting the Quick
Restart™ feature" and "IMPORTANT NOTICE ABOUT
HOT LAMP RESTART" (- page 21).
The lamp is not working
Turn the TV OFF and then ON again. If the problem
properly after the eighth
persists, contact Consume Solutions at
automatic restart (see
1-800-631-3811.
item #3).
Turn OFF the TV and unplug the power cord. Review
The lamp unit door is not
"Lamp unit replacement and care" in Chapter 8 to
seated properly.
ensure that the lamp door is installed securely.
Fan stopped
(light engine).
Fan stopped (POD).
Abnormal operation of Turn OFF the TV and unplug the power cord. Plug the
BUS line. power cord in again and turn ON the TV.
Power Protect
Detection.
The color wheel has
stopped.
An abnormal Turn OFF the TV. Check to make sure all slots and
temperature increase openings in the TV cabinet are not covered, blocked, or
has occurred. dusty. Turn ON the TV again.
"Voice announce" feature
When certain non-standard conditions occur, the LEDs on
the TV will blink and the TV will play a recorded
"voice announcement" describing the condition (see the
table below for the specific conditions that include a voice
announcement).
To repeat the voice announcement and hear additional
information, press the MENU button on the TV while the
LEDs are blinking.
Voice
announce
–
–
–
"Lamp not
working"
"Lamp door is
open."
"Fan
stopped."
"Fan
stopped."
–
–
"Color wheel
stopped."
"Temperature
warning."
HM66 (E/F) Web 213:276