Adjusting The Picture; Selecting The Picture Mode; Adjusting The Picture Quality - Toshiba TheaterWide 50HM66 Operating Manual

HM66_EN.book Page 30 Thursday, February 23, 2006 2:49 PM

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different
modes, as described below.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture settings (factory setting)
Lower contrast for darkened room (factory
Movie
setting)
Preference Your personal preferences
To select the picture mode using the menu system:
1
Press Y and open the Video menu.
2
Highlight Picture Settings and press T.
3
In the Mode field, select the picture mode you prefer.
Picture Settings
Mode
Contrast
Brightness
Color
Tint
Sharpness
Reset
Picture Settings
Mode
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Notes:
• The picture mode you select affects the current input
only (ANT 1 in the example above). You can select a
different picture mode for each input.
• If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change a
picture quality setting (for example, increase the
contrast or change the color temperature), the picture
mode automatically changes to Preference in the
Picture Settings menu.
• If you have previously set the TV to High Bright mode,
and have chosen Reset in item 4 above, the TV will
default to Low Power mode. To set the TV back to High
Bright mode, see page 42.
30
Chapter 5: Using the TV's basic features
ANT 1
Sports
100
50
50
0
50
Done
Mode: Standard
Standard

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color,
tint, and sharpness) to your personal preferences.
C
Selection Pressing
contrast lower
brightness darker
color paler
tint reddish
sharpness softer
To adjust the picture quality:
1
Press Y and open the Video menu.
2
Highlight Picture Settings and press T.
3
Press B or b to select the picture quality you want to
adjust (Contrast, Brightness, Color, Tint, or
Sharpness), and then press C and c to adjust the setting,
as described in the table above.
Picture Settings
Mode
Contrast 100
Brightness 50
Color
50
Tint 0
Sharpness 50
Reset
Picture Settings
Contrast 70
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
The picture qualities you adjusted are automatically saved in
the Preference mode (- "Selecting the picture mode,"
above left).
c
higher
lighter
deeper
greenish
sharper
ANT 1
Sports
Done
Mode: Preference
HM66 (E/F) Web 213:276