A1.2 Options; A1.3 Media; A1.3.1 Media Type - TEC B-SX4T-QP Owner's Manual

APPENDIX 1 SPECIFICATIONS

A1.2 Options

Option Name
Swing cutter module
Rotary cutter module
Strip module
Ribbon saving
module
Expansion I/O
interface board
PCMCIA interface
board
Built-in LAN
interface board
USB interface board
NOTE:
To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or TOSHIBA
TEC Head Quarters.

A1.3 Media

Please make sure that the media being used is approved by TOSHIBA TEC. The warranty does not apply when a
problem is caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorised service
representative.
A1.3.1 Media Type
Two types of media can be loaded for this thermal transfer and direct thermal printer: label or tag. The table
below shows size and shape of the media available for this printer.
Stop
k
position
Cut position
j
Type
B-4205-QM A stop and cut swing cutter.
B-8204-QM Rotary cutter
B-9904-H-QM This allows use of on-demand (peel-off) operation or to take-up
labels and backing paper together when using the rewind guide
plate. To purchase the strip module, please inquire at your local
distributor.
B-9904-R-QM This module moves the print head up and down by using a
solenoid to minimise ribbon usage as far as possible.
B-7704-IO-QM Installing this board in the printer allows connection to an
external device with the exclusive interface.
B-9700-PCM-QM This board enables the use of the following PCMCIA cards.
LAN card: 3 COM 3CCE589ET (recommended)
ATA card: Conforming to PC card ATA standard
Flash memory card: 1MB and 4MB cards (See Section 2.9.)
B-9700-LAN-QM This board enables the printer to be used in a LAN network.
B-9700-USB-QM Installing this board enables a connection to a PC which has a
USB interface.
Black Mark
(on reverse side) Refer to
Label
NOTE 3 below.
D
E
B
A
Stop
k
position
C
?
Cut position
@
Feed Direction
EA1- 2
ENGLISH VERSION EO1-33034
Description
Tag paper
E
A
A1.2 Options
Black Mark
(on reverse side)
D
?