Z5552 Bracket Connector; Scope Of Supply And Weight; Safety Precautions - d&b audiotechnik Z Series Mounting Instructions

1

Z5552 Bracket connector

Scope of supply
4

1.1 Scope of supply and weight

Please verify the shipment for completeness and proper condition
of the items.
Pos. Qty. d&b Code
1 Z5552
including:
[1]
8
[2]
2
[3]
2
[4]
2
[5]
18
[6]
10
[7] 2
[8] 2
[9] 2
[10] 2
[11] 2
[12] 2
1 D2121.EN.01
Weight

1.2 Safety precautions

General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper functioning
and safety of the items, these must be withdrawn from use
immediately.
Load safety information
The maximum permitted safe working load for the bracket
connector is 35 kg / 77.2 lb. This value must not be exceeded
under any circumstances. The Bracket connector is designed to
support the following loudspeakers:
▪ 24S
▪ V7P/V10P
▪ Vi7P/Vi10P
▪ Y7P/Y10P
▪ Yi7P/Yi10P
Description
Bracket connector
Spring washer
U washer 8.4
Screw nut M8
Screw nut M10
U washer 10.5
Hex head bolt M10 x 25
U washer 5.3
Screw nut M5
Hex socket screw M5 x 16
Hex head bolt M8 x 18
Angle connector
Bracket connector
Z5552 Mounting instructions
2 kg (4.4 lb)
d&b Z5552 Mounting instructions 1.1 en