Toshiba Adjustable Speed Drive H3 Operation Manual page 94

Item 277, AM TERMINAL FUNCTION SELECTION
Item 278, AMMETER ADJUSTMENT
Item 279, INDUSTRIAL APPLICATION SELECTION
Item 280, STANDARD SETTING MODE SELECTION
5: Save present parameter settings in separate "user" default memory.
6: Default drive to "user" default memory.
7: Clear INVERTER TYPEFORM ERROR (also defaults drive to factory values).
Item 281, COMMAND MODE SELECTION
4: Local or remote as determined by setting of LOCAL/REMOTE button on keypad
Terminal strip enable, reset, and ESTOP commands are always valid, regardless of Item 281's
setting. With this parameter set to "2", preset speeds from terminal strip will not function.
Item 282, FREQUENCY MODE SELECTION
4: Local or remote as determined by setting of LOCAL/REMOTE button on keypad
Terminal strip enable, reset, and ESTOP commands are always valid, regardless of Item 282's
setting.
TOSHIBA
9 - 25