Toshiba Adjustable Speed Drive H3 Operation Manual page 83

Item 82, ANALOG INPUT FILTER -
Item 83, RR INPUT SELECTION -
with 5 volts on the "RR" terminal.
Item 84, RR REFERENCE POINT #1 -
Item 85, RR REF POINT #1 FREQUENCY -
its reference has the value set in Item 84 above.
Item 86, RR REFERENCE POINT #2 -
Item 87, RR REF POINT #2 FREQUENCY -
its reference has the value set in Item 86 above.
IV TERMINAL STANDARD OR ADJUSTABLE
RX TERMINAL STANDARD OR ADJUSTABLE
PG TERMINAL STANDARD OR ADJUSTABLE
BINARY INPUT STANDARD OR ADJUSTABLE
TOSHIBA
With default programming, drive outputs 40 Hz
9 - 14