Toshiba Adjustable Speed Drive H3 Operation Manual page 44

GROUP:FREQUENCY SETTING PARAMETERS
LIQUID CRYSTAL DISPLAY
PG TERMINAL STANDARD
OR ADJUSTABLE
PG REFERENCE SETTING
POINT #1
PG REF POINT #1
FREQUENCY
PG REFERENCE SETTING
POINT #2
PG REF POINT #2
FREQUENCY
BINARY INPUT STD
OR ADJUSTABLE
BINARY REF SETTING
POINT #1
BINARY REF POINT #1
FREQUENCY
BINARY REF SETTING
POINT #2
BINARY REF POINT #2
FREQUENCY
JOG RUN FREQUENCY
JOG STOP METHOD
*Items 99 - 102 are available only when Item 98 Adjustment Range option 1 is selected.
**Items 104 - 107 are available only when Item 103 Adjustment Range option 1 is selected.
***Item 109 is available only when Item 108 Adjustment Range is set to other than "0".
TOSHIBA
ITEM PARAMETER
NO. DESCRIPTION
98 Bias/gain for PG input selection
(option board)
99* PG reference point #1
100* Output Hz desired when reference
equals value entered in Item 99
101* PG reference point #2
102* Output Hz desired when reference
equals value entered in Item 101
103 Bias/gain for binary input
(via input terminals).
104** Binary reference point #1
105** Output Hz desired when reference
equals value entered in Item 104
106** Binary reference point #2
107** Output Hz desired when reference
equals value entered in Item 106
108 Jog run frequency
109*** Jog stop control
Table continued on next page
8 - 9
(cont'd)
DISPLAY
ADJUSTMENT
RESOLUTION
RANGE
0: Standard -
1: Adjustable*
-100 - 100% of Max. 1%
Out. Freq. X PPR
-Max. Out. Freq. to 0.1/0.01 Hz
Max. Out. Freq.
-100 - 100% of Max. 1%
Out. Freq. X PPR
-Max. Out. Freq. to 0.1/0.01 Hz
Max. Out. Freq.
0: Standard -
1: Adjustible**
0 - 100 % 1%
-Max. Out. Freq. to 0.1/0.01 Hz
Max. Out. Freq.
0 - 100 % 1%
-Max. Out. Freq. to 0.1/0.01 Hz
Max. Out. Freq.
0.0 - 20*** 0.1/0.01 Hz
0: Decelerated stop -
1: Coast to stop
2: DC injection
braking
FACTORY PAGE
SETTING NO.
0 9-14
0 9-14
0.0 9-14
100 9-14
80.0 9-14
0 9-14
0 9-14
0.0 9-14
100 9-14
80.0 9-14
0.0 9-15
0 9-15