A message is displayed while the cable supporting DP alternate mode is connected to the
monitor under the following conditions:
•
When Auto Select for USB-C is set to Prompt for Multiple Inputs.
•
When the DP cable is connected to the monitor.
When you select OSD items of High resolution in Display feature, the following message will
appear:
When you select OSD items of High Data Speed in Display feature, the following message
will appear:
52
|
Operating the Monitor
Dell UltraSharp 24/27 Monitor
Switch to USB-C Video Input:
Yes
No
Dell UltraSharp 27 Monitor
If your PC is not DP 1.4, this option will result in reduced screen performance.
Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes
Dell UltraSharp 27 Monitor
Please disconnect any USB storage device to your monitor during
the switching process (up to 12 seconds).
Do you want to continue?
Yes
U2421HE/U2721DE
No
U2721DE
No
U2721DE