Directing The Display Output When You Turn On The Computer - Toshiba Qosmio F15 Series User Manual

78
Getting Started
Connecting external display devices
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen or to display anything on
your computer screen. To do this:
1 Connect the monitor's video cable to the RGB (monitor) port
on the back of the computer.
2 Connect the device's power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing
Display Properties settings. See the immediately
following section on directing the display output for
more information.

Directing the display output when you turn on the computer

Once you connect an external display device, you can choose
to use the internal display only, the external device only, or
both simultaneously. The quickest way to change the display
output settings is to use the display hot key (
1 Press
2 While holding down
setting you want takes effect.
This hot key cycles through the settings in the following
order:
❖
❖
❖
❖
❖
and simultaneously.
Fn F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Built-in display and TV (or other external video device)
simultaneously
TV (or other external video device) only
Fn + F5
, press repeatedly until the
Fn F5
, or by setting the
+ ):
Fn F5