Table of Contents
Advertisement
Getting to Know the Windows
NOTE
15
Click Yes, then click Next. The wizard displays the
Guide Privacy screen.
16
Click View the Guide privacy statement, read the
statement, click Yes, then click Next. The wizard
displays the Guide Terms of Service screen.
17
Read the Guide Terms of Service (use the down arrow to
view the entire document), click I agree, then click Next.
NOTE
®
When you set up the TV Signal and identify the Set-top box
remote, you may receive a "Remote Not Recognized" message.
When this occurs, you must select the Have Media Cen-
ter Learn My Remote Again From Scratch option.
When you get to the Test Channel Changing option, the
set up program asks you to use the Media Center
remote. To change the channels, use the numbers on
your keyboard. The remote does not have numbers.
When the remote control set up is complete, you can
change TV stations through Media Center by using the
channel up or channel down buttons on the remote.
To skip from channel to channel, for example, from channel 4
to channel 52, you can select channels in Media Center's TV
Guide by using the up and down arrow keys and OK button on
the remote. You can also use the cable Set-top box remote to
select channels.
If you click I do not agree, the electronic TV Guide will not be
accessible on your computer.
You can download the Guide at a later date. To do so, click
Settings on the main MCE window, then click TV and Guide.
Select Set Up Guide Listings to reactivate this portion of the
wizard.
XP Media Center Edition 2005
Starting the Media Center
185
Advertisement
Table of Contents
