Table of Contents
Advertisement
Connecting a standard television, projector, or VCR/
DVD player
S-video cables are not included with your computer. To
NOTE
connect a device to the S-video Out port, you will need to
purchase an S-video cable.
To connect a standard television, projector, or VCR/DVD
player:
1
Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its Video In port.
2
Connect the other end of the video cable to the S-video
Out port on the back of the computer.
3
Turn on the external video device.
4
Set the display mode by pressing
Display Properties settings. For more information, see
"Directing the display output when you turn on the
computer" on page
TECHNICAL NOTE: If you are connecting to a television, you
may need to change the display properties. Most televisions
use or support an 800 x 600 standard resolution.
Connecting external display devices
78.
Getting Started
, or by setting the
Fn + F5
77
Advertisement
Table of Contents
