After Treatment; Cleaning And Maintenance - Philips VisaCsre SC6250 Manual

English
16

After treatment

Cleaning and maintenance

-
First use: pass the daily tip over each area 1 or 2 times.
-
After several uses: pass the daily tip over each area 3 to 4 times, or
pass the normal tip over each area 2 times.
-
For optimal results: pass the daily tip over each area 4 times or pass
the normal tip over each area 6 times.
8 When you have treated all areas, press the on/off button to switch off
the appliance. A complete session normally does not take more than 5
minutes.
9 During and after the session, you will experience the stimulating
massaging action of the Air Lift System™, which stimulates the blood
circulation.
Tip: In areas where full skin contact is harder to achieve, such as the
forehead, try different ways of holding the appliance. Explore vertical and
horizontal movements to find the best way to establish proper contact
with your skin. You can also hold your hand still and move your head
instead.
After the session, apply a nourishing mask, moisturizer, day cream or night
cream. After each session, apply a sunscreen with a sun protection factor
(SPF) of 30 or higher on the treated areas for a minimum of 3 days.
Warning: take into account the following actions for the next 3 days after
you have used the device:
- Do not use any other method of mechanical or chemical exfoliation.
- Do not undergo electrolysis, facial waxing or use depilatories.
You can apply make-up immediately after you have used the device.
Warning: Do not immerse the appliance in water.
Warning: Never use scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the handle or
tips.
Note: Clean the tip after every use for hygienic reasons and to prevent
clogging of the filter. Only use washing-up liquid or an alcohol solution (max.
70%) to clean the tip.