Advertisement
4.2
Installing the KX-TDA30 Maintenance Console
For the system requirements of the PC (e.g., operating system, hardware specifications), refer to
"3.3.1 Installing and Starting the KX-TDA30 Maintenance Console" in the Installation Manual.
Notes
•
Screen shots reprinted with permission from Microsoft Corporation.
•
To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must have
been installed. Follow the instructions of the wizard to install the KX-TDA USB driver.
4.3
Programming the Hybrid IP-PBX
Starting the KX-TDA30 Maintenance Console and Assigning the
Basic Items (Quick Setup)
When you start the KX-TDA30 Maintenance Console with the Installer Level Programmer
Code and connect to the Hybrid IP-PBX for the first time after initialisation (with the factory
default setting), Quick Setup will launch automatically. During Quick Setup, you will setup the
following basic items:
•
Date and Time of the Hybrid IP-PBX. The date and time set on the PC will be used.
•
System Password for installer for PC programming.
•
Operator extension numbers. Operator extensions for all time modes (day/lunch/break/
night) can be assigned.
•
Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with
prefix all feature numbers (except access numbers) when an extension user wants to use
a feature.
•
Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for operator
call and Idle Line Access/ARS can be selected.
•
Remote Maintenance Dial Number. Enter the complete telephone number of the PBX
(including the country code). When necessary, this number will be used to access the PBX
from a remote location for maintenance purposes.
16
Getting Started
1.
Save the setup file of the KX-TDA30
Maintenance Console on your PC.
2.
Double-click the icon to execute the setup
file.
3.
Follow the instructions of the wizard.
) is selected, " " must
Advertisement
