Panasonic Hybrid IP-PBX Getting Started page 14

Hide thumbs Also See for Hybrid IP-PBX:

•

For safety reasons, do not stretch, bend, or pinch the AC cord and the DC cable of

the AC adaptor.

Press the Reset Button with a pointed tool. (The RUN indicator will flash.)

While the RUN indicator is flashing (within about 10 s), return the System Initialise Switch

to the "NORMAL" position. Depending on the configuration, initialisation takes about 1 min

to 3 min. If successfully executed, the RUN indicator will stop flashing and be kept lit.

All data will be cleared and the Hybrid IP-PBX will be initialised to the default values. The DPTs

should show the time as 01:00.

Note

Use the same types of AC adaptor and AC cord that are supplied with the Hybrid IP-PBX

only.

Getting Started

Table of Contents