Toothbrush Handle; Brush Head - Philips CleanCare+ Sonicare HX3215 Manual

16
English
Cleaning

Toothbrush handle

Brush head

Charger
You should clean your Philips Sonicare toothbrush
regularly to remove toothpaste and other residue.
Failure to clean your Philips Sonicare toothbrush
may result in an unhygienic product and damage
to it may occur.
Warning: Do not clean brush heads, the
handle or the charger in the dishwasher.
Warning: Do not clean with boiling hot
water.
1 Remove the brush head and rinse the metal
shaft area with warm water. Make sure you
remove any residual toothpaste.
Caution: Do not push on the rubber seal on the
metal shaft with sharp objects, as this may cause
damage.
2 Wipe the entire surface of the handle with a
damp cloth.
Note: Do not tap the handle on the sink to remove
excess water.
1 Rinse the brush head and bristles after each
use.
2 Remove the brush head from the handle and
rinse the brush head connection with warm
water at least once a week. Rinse the travel cap
as often as needed.
1 Unplug the charger before you clean it.
2 Wipe the surface of the charger with a damp
cloth.