Preparation And Setup; Location And Connection - Uni-ram URS500 Series User Manual

MANUAL - SOLVENT RECYCLERS - URS500, 600, 500EP2, 600EP2

PREPARATION AND SETUP

• Carefully inspect the shipping carton for any sign of transport damage.
• Carefully remove the unit from the shipping carton.
• Check the unit for damage. Report any transport damage immediately to the carrier and your
vendor. Initiate a freight claim with the carrier. The manufacturer is not responsible for freight dam-
age.
• A Liner Bag and Retainer Ring are already installed inside the distillation tank.
• Check the Accessory Kit for the parts listed below. If any parts are missing, contact your supplier. Ad-
ditional consumables and accessories are also listed.
• Level the unit using the adjustable feet and install the Door Handle.
• For models with the Solvent Transfer System (EP2 Models), install the Solvent Transfer Hoses and the
Air Supply Kit. (See instructions on Pages 7-8).
ACCESSORY KIT (Included Parts)
All Models
Manual
Lid Gasket, Standard (Neoprene)*
Liner Bag, 2 Spares
Door Handle & 2 Screws
Solvent Outlet Tube
EP2 Models Only
Transfer Hoses and Fittings (EP2 Series)
Air supply Kit (EP2 Series)

LOCATION AND CONNECTION

This unit is certifi ed for use in non-hazardous locations and hazardous locations
Class 1, Division 1 Group D and Class 1, Division 2, Group D.
• Non-hazardous Location:
The unit must be located outside of a hazardous location. We recommend that the unit be located at
least 6 feet from any potential source of ignition such as electrical receptacles, switches, pilot lights,
fi xtures, contacts and similar equipment. To clarify the defi nition of an appropriate location, contact
your local authority. Use the explosion proof plug and receptacle shown in the Chart under FEATURES
AND SPECIFICATIONS. The explosion proof plug is provided with the unit. The customer is respon-
sible for acquiring the matching explosion proof receptacle. The power cord is connected to the power
Replacement Part Number
NA
770-2150N
See below for re-order numbers
120-318 & 909-404S
770-8131
KIT-TRANSHOSES-A
KIT-AIRSUPPLY-E
5
Revision 2019-07
CAUTION
:
USE ONLY GENUINE UNI-RAM
LINER BAGS WHICH ARE 2 MIL
THICK, LIGHT BLUE IN COLOUR
WITH A SAWTOOTH EDGE AND A
3/16" WELD.
THEY ARE SPECIALLY MANUFAC-
TURED TO BE STRONG, HEAT
RESISTANT AND CHEMICAL
RESISTANT.
USE OF A NON-UNI-RAM LINER
BAG MAY VOID THE WARRANTY.