Controls - Qwic Trend Series Manual

Controls

On / Off switching
Switch the display on with the 'ON/OFF' button on the
back of the display. The same button is used to switch
off the system. The system will shut itself down after 3
minutes not being used to save energy.
Lighting
By pressing the 'LOGO' button for 2 seconds you can
switch the lighting on or off. The screen lighting will also
be on or off at the same time. The lighting symbol left
on the screen shows the status of the lighting (on or
off).
Battery indicator
Every bar of the battery status indicator is about 20%
of the total battery capacity. With 5 bars the battery is
100% full. When the battery status indicator shows no
bars, the midmotor will smoothly cease assistance.
The remaining energy is reserved for lighting which can
be used for about 2 more hours. The USB connection
can not be used when there are no bars in the battery
indicator.
Assistance level indicator
The assistance level indicator shows which assistance
level you are in. There are 10 levels, with level 1
representing an assistance of 50% (of the own pedalling
force), level 5 an assistance of 120%, and level 10
an assistance of 250%. In level 0 the motor offers no
assistance. You can adjust the assistance levels with
the 'PLUS' and 'MINUS' buttons. You can also press the
'PLUS' or 'MINUS' button a little longer to scroll through
the levels faster.
Speed
In the middle right of the screen you can see the
speedometer. This can be set to KPH (kilometers per
hour) or to MPH (miles per hour), see display settings
for how to change this unit.
USB connection
The USB connection of the display can be used to
charge mobile devices such as smartphones and
navigation devices.
Display & Controls: Midmotor models 43