Qwic Trend Series Manual page 40

Controlling the Walk Assist
Use the Walk Assist feature to easily take the bicycle
by the hand, for example when taking it out of
underground storage. Stand firmly next to the bike and
hold your hands on the handlebars. If a brake lever is
present, keep at least one hand on the brake where
the brake-circuit breaker (interruption of the motor
assistance) is located. This is generally is the left brake
lever. Keep the 'PLUS' button pressed while firmly
holding the handlebars. The engine will start after a few
seconds. Once you release the 'PLUS' button the Walk
Assist function switches itself off. The Walk Assist has a
speed of 6 km/h (no load).
(Screen) Lighting
Press the 'ON/OFF' button to turn on the
(screen) lighting. Press 'ON/OFF' again to turn it off
again. When you turn on the screen lighting, the front
and rear lights will automatically turn on as well. They
work on the battery as well, so no extra batteries are
required.
USB connection
The USB connection on the back of the display can be
used to provide power to devices such as smartphones
and navigation devices. It can also be used when the
system is off, if the battery is still on the bike.
40
Settings menu
By pressing the 'SET' button for 2 seconds you can open
the settings menu. By pressing 'SET' shortly you can
switch between the different settings, with the 'PLUS'
and 'MINUS' buttons you can changes the values. By
pressing the 'SET' button again for 2 seconds you can
leave the settings menu again.
SET 0: Setting the Driving-mode
With the 'PLUS' and 'MINUS' buttons you can adjust the
driving-mode. Not every cyclist is the same. One likes a
powerful support where someone else prefers an extra
high range. Therefore the display has 3 different driving
modes that influence the motorpower:
ECO:
NORMAL: Average range, average motorpower
POWER: Extra motorpower, lower range
Every driving-mode has 8 power levels.
SET 1: Resetting the Trip distance
By pressing the 'MINUS' button shortly you can reset
the trip distance. If the trip distance reaches the 500 km
it will be automatically reset.
Display & Controls: Rearmotor and frontmotor models
Extra high range, less motorpower