Advertisement
Depending on whether or not the LAN has a DHCP server to automatically assign IP addresses and
related items.
• Program|Menu
setting defined for device driver in Network Viewer, ImageVision2000 or SmartLink2000.
• Program|Menu
email address, messages sent by the Toshiba MFP are declared to be "from" this email address.
• Program|Menu
valid email address, to which error messages should be sent.
• Program|Menu
SMTP IP address to be used to send emails, or the IP of the ImageVision2000/SmartLink2000
device driver's PC if not intending to use email from Toshiba MFP.
• Program|Menu
• Program|Menu
ON
• Program|Menu
"FTP User" setting defined for the device driver – default is "public".
• Program|Menu
= "FTP Password" setting defined for the device driver – default is "pass".
• Program|Menu
ADDRESS = IP of PC running the device driver for this MFP
• After making changes to the Toshiba MFP's Network Settings, always select the "INITIAL
SETUP
menu to save the changes.
• It is recommended that you then power off and back on the Toshiba MFP and wait at least 2
minutes for it to connect to the LAN, or until the Toshiba MFP has printed its NIC status
report, before attempting to communicate with the Toshiba MFP via the LAN.
Detail
Press the "Program" or "Menu" button to enter programming mode on the Toshiba MFP.
1.
INITIAL SETUP
1.1.
NETWORK
1.1.1.
TCP/IP
1.1.1.1.
BOOTP/DHCP
This should be set to "DISABLE" or "OFF" unless there have a DHCP server on the network, in which
case the IP address of the machine will be determined when it powers up.
The Network Administrator should be able to tell you if there is a DHCP server on the network to assign
IP addresses dynamically.
INITIAL SETUP
INITIAL SETUP
INITIAL SETUP
INITIAL SETUP
INITIAL SETUP
DEFAULT SETTINGS
INITIAL SETUP
INITIAL SETUP
INITIAL SETUP
NETWORK
COMPLETE" or "INITIAL SETUP
NETWORK
TCP/IP
NETWORK
E-MAIL
NETWORK
E-MAIL
NETWORK
E-MAIL
NETWORK
E-MAIL
E-MAIL SETUP
NETWORK
FTP
NETWORK
FTP
NETWORK
LAN FAX
2
HOST NAME = "Domain Name"
E-MAIL ADDRESS = a valid
ERROR MAIL FW ADDR = a
SMTP SERVER ADDR =
RECEIVE MODE = SMTP
E-MAIL TO FAX GATEWAY =
FTP SERVER LOGIN NAME =
FTP SERVER LOGIN PASSWORD
LAN FAX SERVER
NETWORK
DONE"
Advertisement
