Table of Contents
Advertisement
ICC
7)
Assign the Ethernet module a name (we will use "EIP") and an IP address,
deselect "Open Module Properties", and click OK.
8)
Download the configuration.
9)
Switch to online mode. Right click on the 1756-ENET/B module in the I/O
Configuration and choose "Properties".
10) Select the Port Configuration tab from the Module Properties dialog box.
11) Confirm that the IP Address, Subnet Mask and Gateway Address fields are
configured correctly. The IP Address must match the IP Address entered
when the new module was first created. Refer to Figure 65.
Figure 65: Confirming the Module's Properties
Figure 64: Identifying the New Module
69
Advertisement
Table of Contents
