Table of Contents
Advertisement
ICC
user's manual. Similarly, when this user's manual uses the term "register", it
will be referring to the decimal number as it is exposed to the network interface.
Note that although 1500 total registers are available in the register space, not
all of those registers have corresponding parameters that exist in the drive. In
other words, if a read from or write to a register that does not correspond to an
existing drive parameter takes place, the read/write will be successful, but the
data will have no meaning. This feature is beneficial in situations where the
accessing of non-contiguous registers can be made more efficient by accessing
an all-inclusive block of registers (some of which correspond to drive
parameters and some of which do not), while only manipulating those in your
local programming that are known to exist.
23
Advertisement
Table of Contents
