Storage Configuration - Asus M3N78 Manual

LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the
device supports this mode, and if the device was not previously formatted with LBA
mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the data
transfer from and to the device occurs multiple sectors at a time if the device
supports multi-sector transfer feature. When set to [Disabled], the data transfer
from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode.
Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
2.3.6

Storage Configuration

The Storage Configuration menu allows you to configure your storage device(s).
Select an item then press <Enter> to display the sub-menu.
Main
Storage Configuration
Onboard PCI IDE Controller
OnChip S-ATA Controller
SATA Mode select
ASUS M3N78
BIOS SETUP UTILITY
[Enabled]
[Enabled]
[SATA Mode]
DISABLED: disables
the integrated IDE
Controller.
ENABLE: enables
the integrated IDE
Controller.
2-19