3.
Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA5, SATA6)
These connectors are for the Serial ATA signal cables for Serial ATA
3Gb/s hard disk and optical disk drives. The Serial ATA 3Gb/s is backward
compatible with Serial ATA 1.5Gb/s specification. The data transfer rate of the
Serial ATA 3Gb/s is faster than the standard parallel ATA with 133 MB/s (Ultra
DMA133).
If you install Serial ATA hard disk drives, you can create a RAID 0,
RAID 1, RAID 0+1, RAID 5, and JBOD configuration through the onboard
NVIDIA GeForce 8200 chipset.
M3N78
M3N78 SATA Connectors
Important note on Serial ATA
Install the Windows
•
For detailed instructions on how to configure RAID 0, RAID 1, and
RAID 0+1, RAID 5, and JBOD, refer to the RAID manual in the support
DVD.
•
If you intend to create a Serial ATA RAID set using these connectors, set
the SATA Mode select item in the BIOS to [RAID Mode]. See
page 2-20 for details.
•
If you change the SATA Mode select item in the BIOS to [RAID Mode]
or [AHCI Mode], set the Onboard PCI IDE Controller to [Disabled] to
ensure that SATA5 and SATA6 (the black ports) work normally.
•
If you want to do the task as GHOST, we suggest you connect the original
disk to the SATA5 or SATA6.
ASUS M3N78
R
XP Service Pack 1 before using Serial ATA.
®
SATA6
SATA5
SATA3
SATA2
SATA1
1-27