Advertisement
Assembly
Step 7
x2
M5x16 Wood Screw
Step 8
Lock the position of the center rails using
eight (8) M6x10 machine screws, ensuring
the screws come in contact with the center
rails by sliding them as needed.
Step 9
Slide the control box onto the end frame.
Connect cable exiting Leg (controller & control
box side) directly into the control box.
Connect DIN6 cable to the other leg and to the
control box.
Connect controller cable to the control box.
Connect the power cord to the control box.
14105 Avalon Boulevard, Los Angeles, CA 90061
Locate pre-drilled holes toward the front of
the desktop. You can use the set of holes on
either side, but we recommend using the
right side.
Using two (2) M5x16 Wood Screws, attach
the controller to the desktop.
M6x10 Machine screw
|
Tel 310-353-7100
www.VersaTables.com
x8
|
Fax 310-353-7109
Advertisement
