Citizen CZ-01 User Manual page 8

For Safe Operation
• Use the product only with the designated voltage and frequency. Improper
connection may cause electric shock or fire.
• Avoid connecting too many devices to the outlet used for this product and
using extension cords. The outlet may overheat and cause a fire.
• Do not damage, cut, bundle, or alter the power cord. Also, the cord may be
damaged if heavy objects are placed on it, or if pulled or bent with excessive
force, and it may cause a fire.
• Do not install the product in places with salinity or corrosive gases in the air.
This may cause a fire.
• Do not block the vents of the product. Heat may build up in the product and
cause a malfunction or fire.
• Do not stand on or place heavy objects on the product. Also, do not apply
excessive force on the buttons, switches, terminals, etc. This may damage
the product and cause injury to the user or other people.
• Store the bag of the product out of the reach of children. It may cause
suffocation if placed over the head.
• Be careful not to injure yourself or damage other things on the edges of the
product.
• Do not use this product for applications involving human life (such as
medical, space, aeronautic, or other applications that require extreme
reliability).
• The CZ-01 weight 5.8 kg (12.76 lbs.). When moving it, lift it in a way that
avoids excessive physical stress. Lifting recklessly or dropping the product
may cause physical injury.
• Place the product as close to an outlet as possible to be able to easily unplug
the power cord in case of problem.
• If there is dust on the plug, clean it off thoroughly. It may cause an electric
shock or a short circuit.
• If metal objects or liquids have fallen into the product, or if there is smoke, a
strange odor, or any other abnormality, immediately unplug the power cord,
and then contact a service representative. Do not continue using the product
if it is damaged or not operating properly. This may cause an electrical shock,
a short circuit, a fire, or damage the product.
• For the AC input, use a sine wave input within the range of 100 to 240 V
AC. Using a square wave input or pseudo-sine wave input will damage the
internal circuit and result in significant shortening of the product life.
• Be sure to ground the product. Otherwise, a short circuit may occur, causing
an electric shock or fire.
• Do not plug or unplug the cord with wet hands. This may cause an electric
shock.
• Do not open the product, disassemble internal parts, or modify the product.
It may cause an electric shock, fire, or injury, or a product malfunction.
For internal check-ups, adjustments, or repair, please contact a service
representative.
Warning
8