Printer Installation
3
Install the ribbon to the printer unit.
Align left side (1) of the ribbon shaft with the groove and then lower right side (2) of the
ribbon shaft.
4
Close the printer unit's top door.
5
Remove the printer unit's trash box.
Caution
• When the trash box has been removed, do not touch the cutter on the upper part or
you may be cut.
• In order to facilitate color adjustment, media type recognition, and print quantity
management, an IC chip is included in the ink ribbon. Note that a ribbon with an IC
chip that has not been evaluated and approved may not function properly. (If correct
data cannot be read from the IC chip, an alarm will sound. In such a case, ink
concentration levels will be lowered in order to protect the product.)
Align with the groove
and then set in place
New ribbon
16
Trash box