Daikin FTKS L Series Engineering Data page 173

ED041204
Care and Cleaning
Front panel
1.
Remove the front panel.
• Open the front panel.
• Slide the front panel to either the left or right and
pulling it toward you.
This will disconnect the front panel shaft on one
side.
2) Pull
1) Slide
• Disconnect the front panel shaft on the other
side in the same manner.
CAUTION
• When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
• When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
• After cleaning, make sure that the front panel is securely fi xed.
31
01_EN_3P291209-2.indd 31
Split Type Air Conditioners FTK(X)S-L Series
Front panel shaft
2) Pull
1) Slide
2.
Clean the front panel.
• Wipe it with a soft cloth soaked in water.
• Only neutral detergent may be used.
• In case of washing the panel with water, wipe it
with dry soft cloth, dry it up in the shade after
washing.
3.
Attach the front panel.
• Align the front panel shaft on the left and right of
the front panel with the slots, then push them all
the way in.
Front panel
shaft
Slot
• Close the front panel slowly. (Press the panel at
both sides and the central area.)
Operation Manual
12/8/2011 8:48:34 PM
171