Daikin FTKS L Series Engineering Data page 122

Operation Manual
Operating conditions
Recommended temperature setting
• For cooling: 26°C – 28°C
• For heating: 20°C – 24°C
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air fi lters cause ineffi cient operation and waste energy. Clean them once in about every 2 weeks.
Notes on the operating conditions
• The air conditioner always consumes a small amount of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker off.
• Use the air conditioner in the following conditions.
MODE
Outdoor temperature : 10 to 46°C
COOL Indoor temperature : 18 to 32°C
Indoor humidity : 80% max.
Outdoor temperature : –15 to 24°C
HEAT
Indoor temperature : 10 to 30°C
Outdoor temperature : 10 to 46°C
DRY Indoor temperature : 18 to 32°C
Indoor humidity : 80% max.
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
01_EN_3P291209-1.indd 12
120
To change the temperature setting
Press or
• The displayed items on the LCD will change whenever either one of the buttons is
pressed.
COOL operation
18 – 32°C
Press to raise the temperature and press
temperature.
Operating conditions
•
• Condensation may occur on the indoor unit and drip.
•
•
•
.
HEAT operation AUTO operation
10 – 30°C 18 – 30°C
to lower the
If operation is continued out of this range
A safety device may work to stop the operation.
A safety device may work to stop the operation.
A safety device may work to stop the operation.
Condensation may occur on the indoor unit and drip.
Split Type Air Conditioners FTK(X)S-L Series
ED041204
DRY or FAN operation
The temperature setting is
not variable.
Page 32
12
12/8/2011 9:18:11 PM