Corner Thin/Wide Box Mounting - Infinity ISE-12ZWDN650 FD Operating Instructions Manual

DOME CAMERA INSTALLATION
Follow the steps below to mount the Dome Camera with the Corner Mounting Plate and Standard/Compact Pendent
Mount.
• Make a cable entry hole on the wall to recess the cable(s).
• Fix the Corner Mounting Plate on the corner of the wall with proper screws and screw anchors. Then run the
cable(s) through the hole on the Corner Mounting Plate with the Data Cable's 22-pin cable coming out.
• Fasten the Standard/Compact Pendent Mount onto the Corner Mounting Plate with the supplied screws and
washers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming out
of the Pendent Mount's outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
• Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
• Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to the Standard/Compact Pen-
dent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
• Connect the cable(s) to the Dome Camera.
• Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
Corner Wall Mounting: Corner Standard/Mini Mounting Plate +
Standard/Compact Pendent Mount + Indoor Mount Kit

CORNER THIN/WIDE BOX MOUNTING

7.5.2
ITEMS NEEDED:
• Dome Camera
• Data Cable (supplied)
• Ethernet Cable (network Dome Camera)
• Standard/Compact Pendent Mount and equipped items (optional accessory)
• Corner Thin/Wide Box (optional accessory)
• Indoor Mount Kit (optional accessory)
58 | ISE-12ZWDN650 FD
• Waterproof Rubber (Indoor Mount Kit's accessory)
• Screws and Screw Anchors for fixing the Corner Thin/Wide Box (not supplied)
TOOLS NEEDED:
• Tool for drilling
• Tool for screwing
Follow the steps below to mount the Dome Camera with the Corner Thin/Wide Box and Standard/Compact Pendent
Mount.
• Make a cable entry hole on the wall to recess the cable(s).
• Fix the Corner Thin/Wide Box on the corner of the wall with proper screws and screw anchors. Then run the
cable(s) through the hole on the Corner Mounting Plate with the Data Cable's 22-pin cable coming out.
• Fasten the Standard/Compact Pendent Mount onto the Corner Thin/Wide Box with the supplied screws and
washers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming out
of the Pendent Mount's outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
• Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
• Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to the Standard/Compact Pen-
dent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
• Connect the cable(s) to the Dome Camera.
• Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
Corner Box Mounting: Corner Thin/Wide Box + Standard/Compact Pendent
Mount + Indoor Mount Kit
ENG
DOME CAMERA INSTALLATION
ISE-12ZWDN650 FD | 59