Straight Tube; Wall Mount; Compact Pendent Mount - Infinity ISE-12ZWDN650 FD Operating Instructions Manual

Compact integrated high speed dome camera
Table of Contents

Advertisement

Available languages

Available languages

DOME CAMERA INSTALLATION
STEP 9
Tighten the fixing screw of the Fixing
Plate as shown in the figure.
STEP10
Assemble the Decoration Ring to the
Mount by pushing it up through the
camera body and aligning the three
pillar-like fasteners to the correspond-
ing holes of the Decoration Ring.
STEP 11
Replace the Dome Camera's Optical
Cover. The hard ceiling installation is
complete.

STRAIGHT TUBE

7.3.2
The Straight Tube is available in different length: 25 cm and 30 cm.
ITEMS NEEDED:
Dome Camera
Data Cable (supplied)
Ethernet Cable (network Dome Camera)
Straight Tube and equipped items (optional accessory)
Indoor Mount Kit (optional accessory)
Waterproof Rubber (Indoor Mount Kit's accessory )
Screws and Screw Anchors for fixing the Straight Tube onto the ceiling (not supplied)
TOOLS NEEDED:
Tool for drilling
Tool for screwing
Follow the steps to mount the Dome Camera with the Straight Tube.
52 | ISE-12ZWDN650 FD
Ensure that the ceiling can support the weight of the Dome Camera and Straight Tube.
Make a cable entry hole on the ceiling.
Fix the Straight Tube to the ceiling with proper screws and screw anchors.
Attach the Waterproof Rubber to the Straight Tube.
Run the cable(s) through the Straight Tube with the Data Cable's 22-pin cable coming out of the outlet.
Note : After running the cable(s) through the Straight Tube, please block the Tube's outlet with the supplied
sponge to avoid insects entering the tube.
Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to the Straight Tube with the sup-
plied screws and washers. Then adjust the Waterproof Rubber to the joint.
Connect the cable(s) to the Dome Camera.
Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
Ceiling Mount: Straight Tube + Indoor Mount Kit

WALL MOUNT

7.4
The Dome Camera can be mounted on the wall with Compact Pendent Mount, Standard Pendent Mount and Wall
Box. Please follow the installation instructions below for mounting the Dome Camera via different ways.

COMPACT PENDENT MOUNT

7.4.1
ITEMS NEEDED:
Dome Camera
Data Cable (supplied)
Ethernet Cable (network Dome Camera)
Compact Pendent Mount and equipped items (optional accessory)
ENG
DOME CAMERA INSTALLATION
ISE-12ZWDN650 FD | 53

Advertisement

Table of Contents
loading

Table of Contents