Seat Adjustment; Seat Slide Adjustment; Seat Spring Adjustment; Transport Height Adjustment - Simplicity Broadmoor Series Operator's Manual

Maintenance

Seat Adjustment

Seat Slide Adjustment

The seat can also be adjusted forward and back. Move
the lever (A, Figure 17), position the seat as desired, and
release the lever to lock the seat into position.

Seat Spring Adjustment

The seat springs can be adjusted to provide a softer
or firmer ride. Tilt the seat forward and slide the spring
assembly forward for a softer ride, and back for a firmer
ride.
Figure 17
22
Transport Height Adjustment (44" and 50"
Mowers)
 Raising the trunnion on the J-hook will adjust the
deck to the highest position when it is lowered. Lowering
the trunnion on the J-hook will adjust the deck to the lowest
position when it is lowered.
1. Loosen jam nut (A, Figure 18).
2. Remove the hair pin (B) and washer (C) from trunnion.
3. Remove the trunnion (D), J-hook (E), and jam nut (A)
from mower lift arm.
4. Turn trunnion up or down to adjust height.
5. Place trunnion, J-hook, and jam nut in mower lift arm.
6. Install washer and hair pin. Tighten jam nut.
7. Check and adjust if necessary.
A
A
B
Figure 18
E
D
C
2
1
3