Technical Data And Ordering Data; Interbus System Data - Bosch Rexroth Inline Series Configuring And Installing

Application Description | Inline
9

Technical Data and Ordering Data

9.1

INTERBUS System Data

INTERBUS system
Number of I/O points
Number of data words
Transmission speed
Transmission reliability
Protocol
Number of devices
Total number of bus devices
Number of remote bus devices
Number of PCP devices
Number of remote bus levels
Distances
From the controller board to the last bus coupler
From the controller board to the first device
Between two remote bus devices
Between two installation remote bus devices
Between a bus coupler and installation remote bus device
The following values are standard values for the preferred mounting
position (horizontal DIN rail). For different values, please refer to the
terminal-specific data sheets.
The technical data does not claim to be complete. Technical modifications
reserved.
4096, maximum (firmware version 4.4x or later)
8192, maximum (firmware version 4.6x or later)
256, maximum
500 kbps or 2 Mbps
CR check (hamming distance: 4)
IEC 61158
512, maximum
254, maximum
62, maximum (firmware version 4.4x or later)
126, maximum (firmware version 4.6x or later)
16, maximum
12.8 km, maximum (copper)
400 m, maximum (copper)
400 m, maximum (copper)
50 m, maximum (copper)
50 m, maximum (copper)
Electric Drives | Bosch Rexroth AG
and Controls
Technical Data and Ordering Data
47/58