30/58
Bosch Rexroth AG | Electric Drives
Electrical Potential and Data Routing
5.2
Electrical Potential and Data Routing
and Controls
For further information, please refer to the DOK-CONTRL-
ILSYSINS***-AW..-EN-P application description.
As a rule, the potential and data routing for the 24 V voltage area begins at the bus
coupler.
Please refer to the circuit diagram of the terminal to see which
jumpers are provided for a terminal and how they are internally
connected. The circuit diagram is shown in the terminal-specific data
sheet.
Inline | Application Description