Optimising Radio Reception; Selecting The Display Of Variable Text - Blaupunkt DJ50 Operating Instructions Manual

Press or
ing.
The next radio station broadcasting the
program selected will begin to play.
Note:
If the radio is not able to find a station
broadcasting the program type select-
ed, you will hear a beep and "NO PTY"
will appear briefly in the display. The sta-
tion selected previously will then resume
play.
Storing the program types on the
station preset buttons
: to select the pro-
Press or
gram type.
Press the desired station preset
button (1 to 6) > for longer than
two seconds.
The program type selected will then be
stored on the station preset button (1 to
6) > pressed.

Optimising radio reception

Interference-related treble cut
(HICUT)
The HICUT function improves reception
when reception begins to deteriorate. If
interference occurs, then the treble and
the noise is cut automatically.
Switching HICUT on/off
Press MENU 8.
: repeatedly until "HI-
Press
CUT" appears in the display.
: to switch HICUT
Press or
on or off.
: to start seek tun-
RADIO OPERATION
"HICUT 0" indicates that the function is
switched off; when "HICUT 1" appears,
the treble will be cut.
Press MENU 8 or OK ;.
Selecting the display of variable
text
A number of radio stations use the RDS
signal to transmit advertising or other
texts in place of their station names.
These "variable texts" will appear in the
display. It is possible to adjust your ra-
dio so that these "variable texts" do not
appear.
Press and hold down RDS 4 until
"NAME FIX" appears in the display.
To have the "variable texts" dis-
played again, press and hold down
RDS 4 until "NAME VAR" appears
in the display.
35