How To Use This Manual; Safety Instructions And Warnings - Fancom LM.125 Manual

This manual has been compiled with the utmost care. If, however, you should discover an error, please inform
Fancom B.V..
For any questions and support, please contact the local Fancom Sales & Service Center.
The following symbols are used in this manual:
Tips and suggestions.
Note providing recommendations and additional information.
Warning indicating damage to the product if you do not follow procedures carefully.
Warning indicating danger to humans or animals.
Electrical shock hazard. Danger to humans and animals.
Example of a practical application of the described functionality.
Calculation example.
Before installing and commissioning the LM.125 / .250, read the safety instructions, provisions and conditions
carefully. This paragraph contains a number of general safety instructions. The installation of the device and
remedying of any malfunctions should be performed by a certified electrical installer according to the applicable
norms. The guarantee does not apply if this product is installed in any other way than is indicated by Fancom and
if the product's motor has been opened and changes have been made to the product.
Disconnect power before installation.
Use correct wires as shown in the connection diagrams.
Make all wiring connections and check them before applying power. Incorrect connections can cause
permanent damage.
Never place the LM.125 / .250 in a place where the weather has direct influence (not in the sun, not in
places where the temperature can rise sharply etc.).
Inspect the LM.125 / .250 periodically for any damages. Notify your installation technician immediately
of any damages. A damaged LM.125 / .250 is unsafe!
Do not touch any of the LM.125 / .250 moving parts.
Gnd
g
1