KYMCO K-XCT 300i Owner's Manual page 544

12. Weels > Front Wheel
Guide the front wheel out from the fork legs and the brake disc
out from between the pads. Do not squeeze the brake lever
while the disc is not present between the pads.
Remove the collars from each side of the wheel. Inspect the
bearing seals and the O-rings seals on the collars. Replace the
seals if they are in poor condition.
Inspect the wheel bearings by turning them in the hub. If the
bearings have play in them or are rough replace all the bearings
for that wheel. See the Bearing Replacement topic for more
information.
To remove the wheel speed sensor rotor loosen the three bolts
with an
12-4
K- XCT 300i