KYMCO K-XCT 300i Owner's Manual page 359

K- XCT 300i
6. Cooling System > Water Pump
Hold the water pump shaft and tighten the impeller to specification with a
12 mm socket. Remember the impeller has left hand threads.
Torque
Thread
Item Qty
kgf-m lb-ft
size (mm)
Water pump impeller 1 7 1.0-1.4 7.23-10.13
Make sure the water pump cover mating surface is clean.
Install the two dowel pins into the generator cover and set a new water
pump cover gasket in place.
6-48