KYMCO K-XCT 300i Owner's Manual page 494

9.Brakes > Brake Pad Replacement K- XCT 300i
Install the speedometer sensor mounting bolt with an 8 mm socket.
Torque
Item
N-m lb-ft
Speed sensor cable 9.80 - 13.73 7.23 - 10.13
Tighten the brake pad pin securely with a 5 mm Allen.
Pump the brake lever to seat the caliper pistons against the pads.
Check the operation on the brakes before returning the vehicle to
service.
9-49