KYMCO K-XCT 300i Owner's Manual page 261

K- XCT 300i
3. Engine > Engine Installation
Install the main engine ground to the right side of the engine.
Tighten the main engine ground bolt securely with an 8 mm socket.
Install air bleed hose and secure it with the clamp.
Connect the coolant hose to the thermostat. Move the clamp into
place and tighten it securely with a #2 Phillips screwdriver.
Connect the coolant hose to the water pump. Move the clamp into
place and tighten it securely with a #2 Phillips screwdriver.
3-117