Introduction - Hoontech SoundTrack Audio DSP24 Manual

I. Introduction
Congratulations on your purchase of the SoundTrack Audio DSP24. The Audio DSP24 is a PCI
digital interface soundcard designed to work as a stand-alone interface or with a variety of
breakout boxes available from Hoontech.
There are two hardware versions. The normal SoundTrack Audio DSP24 is usually used together
with external boxes to provide multiple in- and output channels. The SoundTrack Audio DSP24
MK II has additionally 2 analog in- and 2 anlog output channels with high-quality 24bit/96kHz
AD- and DA-converters. Most informations in this manual are valid for both hardware revisions.
You should have received the following with your Audio DSP24:
•
Hoontech SoundTrack Audio DSP24 or Audio DSP24 MK II soundcard
•
Digital XG DB I I/O card
•
4x4 pin S/PDIF I/O cable
•
2x2 pin CD-ROM digital cable
•
4x3 pin CD-ROM analog cable
•
10 pin flat digital audio cable
•
4 XLR to 15pin cable for balanced analog I/O (only DSP24 MK II)
•
10-pin flat ribbon cable for connection with SoundTrack Digital Audio (optional)
•
AES/EBU adapter cables – 2 XLR to 1/8" jack adapters (optional)
•
driver and installation CD
•
this manual
S Audio DSP24
OUNDTRACK
- 3 -