Connect Audio Output - Magnavox MP601 Owner's Manual

Connect Audio Output

Follow below picture to connect audio cable and device.
1. Press the button to turn off power of your projector before connection.
2. Use audio cable to connect follow below figure.
3. After connect and turn on both units. Your projector sound from external
device now.
4. After use , turn off both units.
STATION AMPLIFIER
AV CABLE
Important Note:
If there is no sound from the stereo audio output when playing media
contents from a set top box, BD/DVD or streaming players connecting to the
HDMI input, please check the set top box or the player's digital audio
settings and make sure it is set to "PCM Stereo" mode.
Install USB Device And TF (Micro SD) Card
Follow below picture to install USB and TF card.
Turn off the unit before install USB / TF card.
( Aux Out / Line Out / Earphones)
USB
TF
DC I N
AV
TF C AR D
HD MI 1 HD MI 2
US B
12
DC IN
AV
TF C AR D
HDMI 1 HDMI 2
USB