Connect Av Show The Image On Projector Screen - Magnavox MP601 Owner's Manual

Connect HDMI
Refer to the following picture to connect a set top box, a BD/DVD player or a
streaming player to the HDMI input.
1. Turn off the unit before connecting HDMI cable.
2. After connecting, press the
power indicator will turn GREEN.
3. Press the
video from the connected device will be shown on projector screen.
4. Press the button to turn off unit power.
CABLE NOT INCLUDED
Video Player
Important Note:
If there is no sound from the internal speakers when playing media
contents from a set top box, BD/DVD or streaming players connecting to
the HDMI input, please check the set top box or the player's digital audio
settings and make sure it is set to "PCM Stereo" mode.
Connect AV
Follow below picture to connect AV cable and device.
1. Turn off the unit before connecting AV cable.
2. Use AV cable to connect following the below figure.
3. After connecting, press the
turn GREEN.
4. Press the
device will be shown on projector screen.
5. Press the button to turn off unit power.
VIDEO CABLE
Show The Image On Projector Screen
button to turn on unit, the power indicator
button to select HDMI 1 or HDMI 2 and the
AV
TF CARD
HDMI 1
Show The Image On Projector Screen
button to turn on unit, power indicator will
button to select AV mode and the video of AV
LEFT CHANNEL
RIGHT CHANNEL
10
HDMI CABLE
HDMI Stre aming player (not included)
DC IN
HDMI 2
USB
AV
TF CARD
DC IN
HDMI 1 HDMI 2
USB