Connect Vga Show The Image On Projector Screen - Magnavox MP601 Owner's Manual

Connect VGA
Follow below picture to connect VGA cable and device.
1. Turn off the unit before connect VGA cable.
2. Press the
3. After connect, press the
turn GREEN.
4. Press the
VGA device will show on projector screen.
5. Press the
COMPUTER CABLE
NOTE BOOK
Please refer to the following table to adjust the output signal from computer.
VGA
PC
SVGA
XGA
NOTE: In order to get the sound from the unit, please connect AV IN cable when
you connect VGA input.
Show The Image On Projector Screen
button to turn off power of your projector before connection.
button to turn on unit, power indicator will
button to select VGA mode and the video of
button to turn off unit power.
To VGA PORT
640x480
800x600
1024x768
IR
VGA
OR
COMPUTER CABLE
DECK TOP
31.5
34.7
37.9
37.5
31.4
35.1
37.9
46.6
48.1
46.9
40.3
48.4
56.5
11
60
70
72
75
50
56
60
70
72
75
50
60
70