Ordering Information - Avaya S8700 Installation Tool Information

Ordering Information

Table 1. Magneto Optical Server Tool
Comcode
700226269
Cable Pass Through Kit
The Cable Pass-Through Kit is used to facilitate passing cables from the back to the front of an Avaya SCC1 Media
Gateway. This kit is used for the following cable types and situations:
The ribbon cable used to connect to the TN2312AP IPSI circuit pack in the SCC1 media gateway B and to the
TN775D Maintenance circuit pack in SCC1 media gateway A. (See
ribbon cable)
The CAT5 Ethernet cable that connects to the faceplate of the TN2312AP IPSI circuit pack and a port on the
Avaya Ethernet switch. (See
For specific installation instructions refer to the Install IPSI and Maintenance Circuit Packs subection within the
Migrating to the S8700 Media Server section on the S8700 Media Server Library CD.
The Cable Pass-Through Kit is similar in construction to the pass-through tool in the Fiber Pass-Through Kit that is
used during ATM installations.
Issue 3
Description
Magneto Optical Server Tool
Using the Cable Pass-Through Kit for the CAT5
3
Using the Cable Pass-Through Kit for the
cable)
Job Aid
May 2003