Usage; Charging Time Table; Storage - Giant Momentum User Manual

3.2.5 Usage

If only 3% of the EnergyPak power is left, the
EnergyPak will automatically switch assistance to
ECO mode in order to save energy.
If only 1% of the EnergyPak power is left, assistance
will automatically stop. Power assist level indication
bar will blink 3 times. Lights can still be used for over
2 hours.
Power in the EnergyPak can be checked by pushing
the Energy Level check button.
After 15 normal charges, or at least every 3
months, discharge the EnergyPak completely
by riding the bicycle before charging the
EnergyPak again. This will increase the lifespan
of the EnergyPak.
When an EnergyPak is connected to the bike, some
power will get lost in the system when the bike is not in use. To prevent this, the EnergyPak can be
disconnected from the bike when not in use for more than a few days

3.2.6 Charging time table

4A charger time table (110V/200-240V)
80% charge
100% charge
Smart charger time table (110-240V)
60% charge
80% charge
100% charge

3.2.7 Storage

If the bike is not used for a longer period (one month or more) the EnergyPak is best stored:
∙ At 60% of its capacity. For 'smart charger', that is a functionality.
∙ Separate from the bike.
∙ At temperatures between 0°C and 40°C.
∙ Checked every month to see if at least one LED is still blinking. Charge when needed.
Charging the EnergyPak should be done at a minimum of every 3 months. Negligence to this could void
the warranty of the EnergyPak.
12
Charge time in hours
300Wh 8,8Ah
110V 200-240V
2:20 h 1:45h
4:40h 3:30h
Charge time in hours
375Wh 10,3Ah
<1:00 h
1:40 h
2:45 h
400Wh 11,3Ah
110V 200-240V
3:00h 2:00h
6:00h 4:30h
400Wh 11,6Ah
1:00 h
1:50 h
3:00 h
500Wh 13,8Ah
110V 200-240V
3:40h 2:45h
7:20h 5:00h
500Wh 13,8Ah
1:30 h
2:20 h
3:40 h