Frequently Asked Questions; Ridecontrol - Display; Energypak - Giant Momentum User Manual

6 FREQUENTLY ASKED QUESTIONS

6.1 RIDECONTROL - DISPLAY

My Charge display can be rotated over the handlebar. Giant should have tightened this better.
∙ The Charge display should not be overtightened. It should be able to rotate a little in case of hard
impact.
Can I upgrade my Charge display with an EVO display?
∙ Giant E-parts are mostly interchangeable. Swapping a Charge display for an EVO version is possible.
Can I connect a Charge or EVO display to my RideControl One?
∙ The RideControl One is designed to function without a display. The RideControl One with ANT+ logo
can send ride data wireless to external displays that can receive ANT+ data.
How can I pair a ANT+ device to my RideControl One?
∙ The procedure can vary per device. Please consult your device manual for information how to search
and pair an ANT+ device, and follow the procedure.
There is an event code on my screen. What should I do now?
∙ The event code shows something irregular has happened. It is best to contact your dealer shortly. It
will not harm your bike if you continue using it.
An event code was displayed on my display, but now it is gone. What should I do?
∙ A system event has occurred. The event is not persistent. There is no need to contact your dealer
immediately and the system event can be checked during your next routine service check.
When I change settings on my EVO display, it seems the new digits show on top of the previous
ones. Can you explain what is going on?
∙ The EVO display is a 'liquid crystal display', using liquid for displaying data. At colder temperatures
it takes longer for the digits to fade out. The display is not broken. New settings like adjusting the
assistance level are active instantly.
Some of my RideControl's functions don't seem to match exactly with the descriptions in this
user manual. Why is this?
∙ It may be that the programming of your RideControl (firmware) needs to be updated or has been
updated since this manual was written. Ask your local Giant dealer to check this for you and make
sure it is up to date.

6.2 ENERGYPAK

How do I know how much charge my EnergyPak has when it is not connected to the bike?
∙ By pushing the power button on the EnergyPak, LEDs will light up, indicating the remaining capacity.
Some Giant EnergyPaks have a higher capacity than others. Why is the housing not
consequently bigger?
∙ For different capacities, Giant uses cells with different densities. This way, housing can be the same
and fit a variety of bikes
Can I retrofit a bigger capacity Giant EnergyPak in my bike?
∙ Yes, original Giant branded EnergyPaks are interchangeable, as long as the shape and release
25