Download Print this page

SMART Fortwo 2009 Equipment & Instructions page 72

Electrical system

Advertisement

For circuit 15 OFF the instrument cluster can be activated under the following preconditions:
Circuit 58 ON
l
The instrument cluster illumination is switched on and the current contents of the multifunction
display are displayed. After circuit 58 OFF the instrument cluster remains active for another 30 s.
By pressing a button on the instrument cluster.
l
The multifunction display illumination is switched on for 30 s and the current content displayed.
Acoustic signals
The following acoustic signals are produced and output via the sound signal generator integrated in the
instrument cluster:
Turn signal indicator
l
Warning and information signals
l
Turn signal indicator
The turn signal indicator is always accompanied by an acoustic clicking sound generated in the same
rhythm. The acoustic turn signal indicator is actuated with:
Turn signaling (at double frequency if a turn signal lamp fails)
l
Hazard warning flashing
l
Warning and information signals
A warning or signal tone is emitted:
When the standing lights are switched on, the transmitter key removed and the driver door open (light
l
warning)
When the driver door is opened while the engine is running and a gear engaged (door warning)
l
As confirmation that the daytime running lights have been activated or deactivated (with code (K06)
l
Daytime running lights)
If at circuit 15 On and with the doors closed, the driver seat belt buckle restraint systems switch
l
(S68/3) is not closed (seat belt reminder warning)
If the driver seat belt buckle restraint systems switch or the front passenger seat belt buckle restraint
l
systems switch (S68/4) is not closed when the front passenger seat is occupied and the vehicle speed
is v > 25 km/h (seat belt reminder warning)
After circuit 15 Off and after removing the transmitter key, when the vehicle was locked using the
l
emergency function
Actuation in each instance is via the CAN by the SAM control unit.
Instrument cluster (IC [K]), display instrument and
warning systems
Wiring diagram large instrument (instrument cluster)
GF54.30-P-0002-08MCU
PE54.30-P-2001MCU

Advertisement

loading