Advertisement
Fig. 49: Identifying Additional Instruments Components
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Remove
1
Adjust driver seat to the rear
2
Remove instrument cluster (A1)
3
Detach covering (3) with clip
remover, as shown, and remove
Install
4
Slide wiring harness for additional
instruments (6) through the left
opening and under the covering (3)
towards the instrument cluster
5
Clip additional instruments (A15)
into instrument panel
6
Bend into the footwell and route
wiring harness for additional
instrument (6) at the bottom of the
instrument panel upper section
towards the instrument cluster
7
Hook wiring harness for additional
instruments (6) into holders (arrow
C and B) at bottom on instrument
panel upper section
8
Detach black, 3-pin connector (5)
from vehicle wiring harness in area
of instrument cluster (A1)
9
Connect black, 3-pin connector (5)
and black, 3-pin coupling (6.1) of
* not for USA
* for USA only
Clip remover
The additional
instruments connector
AR54.30-P-6015MCC
AR54.30-P-6015MCU
*452589016300
Advertisement
