Philips DECT1111S/29 User Manual page 5

Installing your DECT 111
Plug the power supply
& line cord into the base station
If you have a broadband DSL internet Installation,
please make sure you have one DSL filter plugged
directly on each line socket used in the house and
check the modem and the phone are plugged in
the correct filter slot (one specific for each)
Plug the power supply &
line cord into the wall socket.
Always use the cables provided in the box.
Slide open the battery
compartment cover.
Place the 2 batteries as
indicated. Respect polarity.
Slide the battery
compartment cover back.
batteries, only use rechargeable NiMH.
Optimal battery life is reached after
3 cycles of full charge / discharge.
Standby time : around 100 hours
Talk time : around 10 hours
Put the handset on the
base and charge for 24 hours.
4
http://www.philips.com/faqs/dect
When replacing the